Maple RidgeWhich is a good cold storage installation manufacturerBrand strategy is the key to improve competitiveness

632HP195506591   ·  2022-04-27 02:22:18   ·   energy

Goods are imported and exported frequently and the throughput is large according to the requirements of production and operation - floor installation of cold storage: first level the floor, then install the floor, select a beautiful floor and put it in a conspicuous place, and do a good job in the floor and evaporator drainage system.Maple Ridge,The valve shall be installed as close as possible to the cooling fan. The solenoid valve shall be installed horizontally, and pay attention to the liquid outlet direction.Other aspects: in the design process of food cold storage, it is also necessary to consider the cooperation between the cold storage and on-site fire fighting, ventilation water and electricity systems. It should meet the requirements of safety, science and environmental protection. When designing and installing the cold storage, the drainage problem must be considered, and the following points should be paid attention to during redesign and installation.Bahawalpur,Technical assurance measures for the installation of cold storage: during production in the production workshop, the production shall be carried out in strict accordance with the operation rules specified in ISO quality operation, self inspection and inspection application shall be carried out to ensure that the factory pass rate is, and unqualified products are not allowed to leave the factory.General quick-frozen warehouses are mostly cooled by refrigeration mechanism with low gasification temperature (ammonia or Freon)When installing polyurethane insulation board, ensure that its surface is smooth and flat without scratch and warpage.


Maple RidgeWhich is a good cold storage installation manufacturerBrand strategy is the key to improve competitiveness



Various construction materials such as material certificate,Maple RidgeInstallation of cold storage Co., Ltd, test report and stage acceptance record, shall be carried out simultaneously with the project construction, carefully, timely, accurately and comprehensively reflect the whole process of production and construction, and actively cooperate with the owner in design change and technical negotiation.The installation of refrigeration pipeline requires that the diameter of copper pipe shall be selected in strict accordance with the interface of compressor suction and exhaust valve. When the separation between condenser and compressor exceeds M, the pipeline diameter shall be increased.According to the size and nature of the cold storage area and in combination with local regulations, the construction form of food cold storage warehouse is to determine the plane layout based on the site, whether it is a single-layer or double-layer warehouse, and the structure is the selection of steel structure or reinforcement solidification. Cold storage capacity, production process, refrigeration, product stacking, etc. are used to determine the size and location of the cold storage room, so that it can become a whole.property right, flame retardant and high temperature resistant polyurethane is a kind of flame retardant self extinguishing material after adding flame retardant. Its softening point can reach more than ℃, and it will decompose only at higher temperature. In addition, polyurethane forms carbon deposits on the surface of the foam, which helps to isolate the foam below. It can effectively prevent flame spread.Generally speaking, the construction of cold storage is to ensure the quality of buildings with its strict heat insulation,Maple RidgeHow much is the construction and installation cost of cold storage, sealing, firmness and frost resistance.Operating the unit: regularly observe the oil level and oil return of the compressor and the cleanliness of the oil. If the oil is dirty or the oil level drops, it shall be solved in time to avoid adverse effects.


Maple RidgeWhich is a good cold storage installation manufacturerBrand strategy is the key to improve competitiveness



Insufficient refrigeration dose and capacity in the system: there are two main reasons for insufficient refrigerant circulation,investment,Install the electric control system. The electric control system of the cold storage mainly includes electric controller, electric door, lighting and other electrical equipment in the cold storage. The power supply of the cold storage is required to be stable phase line, and the power supply or backup power supply can be used as required. The circuit shall have reasonable discharge and corresponding protective measures.Do a good job of power failure early warning. The management personnel of the controlled atmosphere storage shall often pay attention to the notice of the local power department. In case of power restriction or line transformation, they shall do a good job in time. For sudden power equipment failure and artificial line, it is recommended to install power failure alarm, and the loss will be reduced to a low level.The common phenomenon of quick freezing storehouse is that the temperature of quick freezing storehouse can't drop down or drops slowly. Now, a simple analysis is made on the reasons for the slow drop of temperature: the cold capacity loss of quick freezing storehouse is large due to poor thermal insulation or sealing performance; the poor thermal insulation performance is due to insufficient thickness of thermal insulation layer of pipeline and warehouse thermal insulation wall resulting in poor thermal insulation and thermal insulation effect, It is mainly caused by improper selection of insulation layer thickness in design or poor quality of insulation materials in construction.Maple Ridge,The assembled cold storage body often adopts double-sided color steel plate of polyurethane thermal insulation material, which has excellent thermal insulation performance, storage and circulation effect and reduces operation energy consumption. Of course, more important is the choice of refrigeration system. For example, at present the refrigeration system of fluorine refrigerant is still the mainstream, but when selecting the type and power of cooling equipment, it is necessary to calculate the data for the installation of cold storage, and then make a high-quality choice.Frozen and refrigerated storage began to change to shelf and pallet storage to complete the goods according to & ldquo; First in first out & rdquo; It is conducive to improve the quality of commodity storage and reduce loss.Danfoss thermal valve is adopted for the thermal valve of the cold storage, with guaranteed quality; Due to the high temperature requirements of the cold storage and the high degree of automation and regulation of the temperature, the temperature system of the cold storage adopts microcomputer full-automatic,Maple RidgeInstallation price of cold storage project, does not need special people to operate, and can be remotely controlled. When the temperature exceeds the specified range, it will automatically alarm, which is of great significance to the proper preservation of the cold storage.

3 Replies   |  until 2022-04-27 02:22:18 | 219 Views

Wholesale and retail of Wujinjiaodian 2022-04-27 11:22:56 support  0 | be opposed to  0

Feels of value for money, service attitude is very good, Maple RidgeWhich is a good cold storage installation manufacturer workmanship is very good, nothing fussy, all five points

Non-ferrous metal forgings 2022-04-27 11:31:52 support  0 | be opposed to  0

Ask, can I send Maple RidgeWhich is a good cold storage installation manufacturer specific specifications, let me call you guys.

Rail Fastening System 2022-04-27 10:01:43 support  0 | be opposed to  0

After receiving the goods, I feel that the quality Maple RidgeWhich is a good cold storage installation manufacturer is still relatively good, consistent with the seller’s description, very satisfied, the delivery speed is relatively fast, the logistics company’s service attitude is very good, and the delivery speed is very fast. In general, this This is a very satisfying purchase, thank you to the seller.
Log inContent can only be published later