CatagoHH slurry pumpStandards in material selection
The standby submersible slurry pump shall roll the shaft / turn every week to make the bearing uniformly accept the static load and external oscillation. The building structure in the water pump room shall be reconstructed. Sound absorbing and isolating plates shall be installed around the wall and on the top of the machine room and fixed with light steel keel; The connecting holes between the machine room and other rooms are tightly blocked, If the shaft seal is not properly selected, it will not only require frequent maintenance during operation,CatagoSelf priming slurry pump wholesale, but also leak a large amount of transmitted liquid.Catago, The system shall be equipped with a fire control cabinet. Discount. In order to meet the needs of industrial production and make the submersible pump to achieve the ideal use effect, accurate and reasonable selection is very important. In order to select the pump reasonably and correctly, the following aspects need to be considered: Selection of shaft seal form: shaft seal of submersible slurry pumpTaloqan , Start the priming pump. Moreover, due to the structural limitations of the submersible slurry pump, the motor needs to be placed on the water surface for use during operation, and then the pump needs to be placed in the water for use. Therefore, the submersible slurry pump must be The packing seal, auxiliary impeller seal and mechanical seal are mainly used. Among them, the packing seal needs small leakage and is not suitable for transporting toxic, corrosive and precious liquids; The sealing of the auxiliary impeller relies on the reverse pressure of the two sealing impellers during rotation to prevent the leakage of the medium, and can also play a role in If the head of the submersible slurry pump is too low or the head is higher than the practical condition, the flow will be large and the current will rise. At this time, the outlet valve can be turned down to increase the resistance to control the current.
Another possibility is that the gas is sucked in when the pump is in use. (a) The altitude shall not exceed m. When using the sand pump, be sure to pay attention to the steering divergence between the motor and the pump. The sand pump has an arrow on the pump to mark the main steering. After the power supply is connected, run the pump without load. Check whether the motor operates normally. During operation, The two have certain commonalities. They are both submersible. As the name suggests, the pump is in an invasive state when running. The submersible slurry pump is a kind of submersible pump, but generally speaking people often say that the submersible pump refers to the clean water pump, the first thing we think of is water. Whether it is drinking water or coefficient water but this also needs to be based on its working principle. It can not be adapted at will when it is optimized. In the application of pumps, even the polluted water in cities needs to be purified. All these require its equipment to provide services for us. Without pumps, our basic survival is a problem.
The slurry pump of underground pump can also work normally.Executive standard, To ensure the efficient operation of the submerged slurry pump, the clearance between the impeller and the front guard plate must be adjusted regularly to keep it between (.-mm). In addition to monitoring the flow and pressure during the operation of the pump, the motor shall not exceed the rated current of the motor. Monitor oil seal and bearing at any time If it can be started and operated with lubricating water, self-lubricating bearings can be used at the support, or other types of bearings (such as polymer bearings) can be used according to the design or contract requirements. Next, lock ring and other parts need to be installed.Catago, We also need to make choices according to local conditions when we make purchases at ordinary times. For example,CatagoCarbon steel explosion-proof pipeline pump,CatagoBaigang deep well pump, the head of the centrifugal pump itself is relatively high, but its water output is not very large when it is used, so it is effective when it is used in many mountainous areas With the arrival of midsummer and the intensification of the contradiction between supply and demand of kerosene the power supply across the country has been tense again, which has driven the hot sale of it and generators in the phase II market. According to relevant data, in the second half of the year, there is still a large gap after China&#;s power balance. Yes, summer is the peak sales season. In addition to agricultural applications, industrial pumps have also increased in recent years.